That's okay, I needed to do a full cleaning anyways

Just remember, measure twice, cut once.

If you get everything out if those 3.5” / 5.25” bays you might just be able to do a clever rotation to get the card into place

Been there. Considered some structural mods, turns out cases are one of the few things that aren't miserably overpriced yet.

I had the same problem not too long ago. I just bought a PCI-E extender and have the card sitting outside the case.

This should be marked NSFW before an admin sees it uou heathen

Depending on the case the bays can be removable. I had to take mine out to my GPU.

Buuuut if the GPU doesn’t fit in the case length wise these massive ass GPUs probably won’t fit height wise either. My 12vhpwr cable is making an uncomfortable ass turn with the side panel on. And it seems like every angled adapter is more house fire than the last so I’ve held off on adapters.

I still have an AMD 7970 laying around with a cutoff shroud for this reason.

I was young and wanted to play...

Or keep cutting until it's long enough!

• Red Green

GET BIGGER CASE ADD LIGHTS MAKE BIG SUPER TOWER AND REWIRE THE CIRCUIT BREAKER FOR MORE POWER

I DON'T UNDERSTAND SMALL CASE NO ROOM FOR DECORATIONS

Ah yes, open air cooling.

To be fair it wasn't small when I had a 6670

Yeah I could technically remove the drive bay, but I keep accepting HDDs from friends so they all full

I mean, tis efficient

I'm so sorry don't strike me down admin overlords

We've all been there

And then cut a little bit more, just to be sure.

I am curious the case now. I am always paranoid about this and haven’t bought a 3 fan for this reason

...once

I would be so worried about destroying the GPU I'd sooner remove the motherboard and reinstall them both as a single component. Idk if it's just me but I always have an ass of a time getting the GPU in and out of the PCI slot with some trepidatious combination of rocking, pulling/pushing what feels like way too hard, and destroying my fingers trying to operate that little slot lock piece. Skill issue?

cutoff shroud

Without the space in "cut off" it makes it sound like a special kind of shroud.

I did that a long time ago. It worked. Had my graphics card sitting on the desk next to my tower.

I just got tin snips and cut the case out when I downsized cases. It was a cheap one I had kicking around so i didn't feel too bad

Full ATX 4 Life

Cut off or gnawed off?

I think I only had pliers at hand, so gnawed off.

Pro Tip: Always measure the available space in your case before orderning new hardware.

When I got my huge GPU I had to run the wires to the top of the case with a PCIe extension.
I ran the GPU on top of the case for a few years. Great ventilation and it didnt heat up inside the case lol

https://www.coolermaster.com/en-global/products/NSE-400-KKN2.html This is sub-$200 CAD, and has an absolute ton of drive bays, including a few 5.25" because it looks like you still have an optical drive in there. It should also be big enough to fit that GPU.

Reminds me I need to order a new, bigger Fractal case.

Like a glove