| Post Reply | RetroFed Forum Forum Index » Arduino |
| Author | Message | ||
|---|---|---|---|
MapleEngineer
lemmy.ca
MapleEngineer@lemmy.caJoined: 2023-06-14 |
I needed some LEDs so that I could track what my data lines were doing. I started with a bunch of LEDs and resistors on a breadboard. From there I made up a small block of SMD LEDs and resistors on a piece of proto board.
Then I moved to an actual prototype on a dedicated protoboard.
Finally, I produced the finished product. BLINKY LIGHTS!
The friend who I work with can design a board entirely in software, we use Pulsonix, without every making a prototype, send it for manufacture, and get working boards back. Even when I build multiple prototypes I often end up with boards that need FECs to make them work. |
||
| 1 Original | |||
| Post Reply |
Back to top |