This is an automated archive made by the Lemmit Bot.

The original was posted on /r/linux_gaming by /u/28874559260134F on 2026-08-12 08:50:07+00:00.

---

Note: I am not the author nor a contributor to the lact project but just a simple user.

---

Link to Github: https://github.com/ilya-zlobintsev/LACT/releases/tag/v0.10.0

---

Highlights

New Nvidia OC settings

Two new options added have been added for Nvidia:

• PowerMizer mode

This setting lets you force the GPU into the highest p-state. This is similar to the "performance level" setting on AMD.

• Voltage boost

This slider can be used to allow the GPU to boost to slightly higher voltages. This is not a full voltage offset setting, and only allows for slightly more headroom, but it might be beneficial for some OC setups. If you've used MSI Afterburner on Windows, this setting is the voltage slider in the main window.

More Nvidia sensor readings

The hotspot sensor on Blackwell now works with a Blackwell-specific path, instead of reporting bogus values.

Support for per-memory-chip temperature sensors has been added. This works on GPUs with GDDR6x and GDDR7 memory, including showing both front and back sides of the PCB for clamshell cards.

Thanks to Paulo Games, who initially found these sensors and shared his discoveries with the project.

Improved initial setup

When installing LACT, you have to enable the system service in order to use a lot of the functionality.

Previously, you would get a dialog telling you to copy and run a command to enable the service.

Now, there is an interactive wizard to manage the service. This should make the setup process easier for new users:
image

GTT memory usage display on AMD

There is now a status bar for GTT (GPU accessible system memory) usage. This is particularly useful on iGPUs to see if you are hitting the size limit when running VRAM-heavy applications.
image

Other improvements

• You can now force dark/light theme preference from app settings
• Reloading settings on suspend/resume is now more reliable
• Setting profile hook commands now requires admin auth through polkit
• lact cli detach/reattach commands have been added to allow to "release" a GPU from LACT. The target use case is to temporarily ignore a GPU in order to allow it to be attached to a VM.