My kitchen scale is powered by a cr2032 lithium button battery. Yes, it was sloppy of me to buy the scale without seeing how it was powered. I only use the scale once or twice per month, yet these shitty button batteries only last a few months. It seems like I only get about ~6—12 measurements before the battery is dead.

WTF? This seems to defy physics. The scale automatically powers off. Of course it must always have some power because there is no ON switch. The scale detects capacitive touch taps or weight before turning on the display.

Digital calipers use a button battery which also only gives a dozen or so measurements before the battery is dead. It seems the calipers power on when the case is snapped shut. Maybe the rattling causes it to power on since it’s very touchy. Turns on with the slightest movement.

My bicycle helmet takes a cr2032, which only lasts a few months. Perhaps because it’s hard to remember to turn off the light. But still, it’s a shitty design because it has no timer or motion sensor. Or would a motion sensor itself use more power than the LEDs?

Questions:

• are button batteries a significant e-waste burden?
• are the batteries themselves really short lived, or are the appliances that use them all just poorly designed?

How are these things dying on you this quick? I have a kitchen scale that uses the same battery type and it has last me 3 years and counting (and yes, it is actually seeing a fair bit of use). It must be shitty design either on the products or the battery quality or something

Does your scale have a physical off switch?

My scale turns on by detecting a load, or if I tap it. It seems to be a really stupid design by someone thinking they could be slick and get rid of a power button. Some circuits must always be running on my scale to get the signal to turn on.