RetroFed Forum

Welcome to the nostalgia-filled piefed instance of yesteryear.

Open Registration with Application questionnaire.

If you have a question or comment you can post in !meta@retrofed.com or message @DosDude@retrofed.com or @Die4Ever@retrofed.com

In case of downtime and/or emergency, we will post updates on @DosDude@mastodon.social

Some rules we try to uphold:

Be civil. Bigotry is not welcome. This includes (but is not limited to): transphobia, queerphobia, racism, ageism and ableism. We do not promote hate.
Communities need to be Retro or Retro-adjacent.
Please don't upload pornographic content. (use an external image host for that)

TheYang@lemmy.ml Joined: 2023-06-06

Hi there, I've been having a little trouble printing models with my MINI+, when there is very low extrusion between retractions. The Extruder grinds the filament through, and then the filament in the hotend burns until it gets stuck as well.

It usually only happens when I print extremely fine things like DnD (2") miniatures at .05mm layer height.
For now I've switched to .15mm layer height and have not had the issues since, but I wonder if there's something that could be done, except changing the Extruder/Hotend?

Welcome to the nostalgia-filled piefed instance of yesteryear.

Open Registration with Application questionnaire.

If you have a question or comment you can post in !meta@retrofed.com or message @DosDude@retrofed.com or @Die4Ever@retrofed.com

In case of downtime and/or emergency, we will post updates on @DosDude@mastodon.social

Some rules we try to uphold:

Be civil. Bigotry is not welcome. This includes (but is not limited to): transphobia, queerphobia, racism, ageism and ableism. We do not promote hate.
Communities need to be Retro or Retro-adjacent.
Please don't upload pornographic content. (use an external image host for that)