RetroFed Forum

Welcome to the nostalgia-filled piefed instance of yesteryear.

Open Registration with Application questionnaire.

If you have a question or comment you can post in !meta@retrofed.com or message @DosDude@retrofed.com or @Die4Ever@retrofed.com

In case of downtime and/or emergency, we will post updates on @DosDude@mastodon.social

Some rules we try to uphold:

Be civil. Bigotry is not welcome. This includes (but is not limited to): transphobia, queerphobia, racism, ageism and ableism. We do not promote hate.
Communities need to be Retro or Retro-adjacent.
Please don't upload pornographic content. (use an external image host for that)

v1605@lemmy.world Joined: 2023-07-02

So after the volume was fixed I discovered the board . Turns out there were multiple issues. First the charge led was dead (tested with multimeter in diode mode) so that is swapped out with a blue one. Then EM8 needed a reflow to get a good connection across. The final issue was a bad trace under the cartridge slot from F2 to D1. For that I added the bodge wire seen in the photo.

Welcome to the nostalgia-filled piefed instance of yesteryear.

Open Registration with Application questionnaire.

If you have a question or comment you can post in !meta@retrofed.com or message @DosDude@retrofed.com or @Die4Ever@retrofed.com

In case of downtime and/or emergency, we will post updates on @DosDude@mastodon.social

Some rules we try to uphold:

Be civil. Bigotry is not welcome. This includes (but is not limited to): transphobia, queerphobia, racism, ageism and ableism. We do not promote hate.
Communities need to be Retro or Retro-adjacent.
Please don't upload pornographic content. (use an external image host for that)