| Post Reply | RetroFed Forum Forum Index » 3DPrinting |
| Author | Message | ||
|---|---|---|---|
ProdigalFrog
slrpnk.net
ProdigalFrog@slrpnk.netJoined: 2023-07-04 |
|
||
| 53 Original | |||
|
Korhaka
sopuli.xyz
Korhaka@sopuli.xyz Joined: 2025-01-14 |
First thought was nope nope nope to diy diving helmet, but looks like it would be quick to remove so not too bad. Feels way overengineered if you just wanted to sit in your pool though. I know snorkels get into problems with depth as your lungs can't inhale against the pressure. But I am curious how deep that would get you. The dead air in the snorkel is another issue but you can solve that easily with some valves or just exhaling through your nose. Bit impractical to have a very long rigid snorkel but a tube attached to a float could work. Just not sure what the depth limit would be before you can't fill your lungs anymore. 1m? 5m? |
||
| 8 | |||
ProdigalFrog
slrpnk.net
ProdigalFrog@slrpnk.netJoined: 2023-07-04 |
First thought was nope nope nope to diy diving helmet, but looks like it would be quick to remove so not too bad. Feels way overengineered if you just wanted to sit in your pool though. I know snorkels get into problems with depth as your lungs can't inhale against the pressure. But I am curious how deep that would get you. The dead air in the snorkel is another issue but you can solve that eas...
His design is essentially a diving bell helmet with a pressurized feed of air from an air compressor, so the lungs don't have to overcome breathing through a snorkel. He plans to use it in shallow areas around Florida, he was only testing it in his pool. |
||
| 13 | |||
|
Phoenixz
lemmy.ca
phoenixz@lemmy.ca Joined: 2023-06-10 |
His design is essentially a diving bell helmet with a pressurized feed of air from an air compressor, so the lungs don't have to overcome breathing through a snorkel. He plans to use it in shallow areas around Florida, he was only testing it in his pool.
Though this is awesome and cool, but I feel like we're waiting for the first "I have no clue about physics or what I'm doing" ending up dead |
||
| 6 | |||
|
PointyFluff
lemmy.ml
PointyFluff@lemmy.ml Joined: 2020-06-28 |
The oceangate is strong with this moron. |
||
| 4 | |||
|
Gumus
lemmy.dbzer0.com
Gumus@lemmy.dbzer0.com Joined: 2025-02-28 |
The oceangate is strong with this moron.
Check out his videos. If anyone knows how to properly calculate pressure for any application, it'd be Hyperspace Pirate. I agree this idea is silly and unnecessary (as he acknowledges himself), but it's done safely. He's done many projects more dangerous than this. |
||
| 10 | |||
Sphks
jlai.lu
Sphks@jlai.luJoined: 2023-07-03 |
First thought was nope nope nope to diy diving helmet, but looks like it would be quick to remove so not too bad. Feels way overengineered if you just wanted to sit in your pool though. I know snorkels get into problems with depth as your lungs can't inhale against the pressure. But I am curious how deep that would get you. The dead air in the snorkel is another issue but you can solve that eas...
My concern would be about lungs overpressure when going to the surface (and ears overpressure too, when going down/up, but less deadly). |
||
| 2 | |||
|
Korhaka
sopuli.xyz
Korhaka@sopuli.xyz Joined: 2025-01-14 |
Though this is awesome and cool, but I feel like we're waiting for the first "I have no clue about physics or what I'm doing" ending up dead
Should be ok as it isn't going that deep anyway. If it fails you get out and surface. |
||
| 2 | |||
|
Korhaka
sopuli.xyz
Korhaka@sopuli.xyz Joined: 2025-01-14 |
My concern would be about lungs overpressure when going to the surface (and ears overpressure too, when going down/up, but less deadly).
Yeah, it's adding some risks of diving without many of the safety mechanisms or training. |
||
| 3 | |||
|
KyuubiNoKitsune
lemmy.blahaj.zone
KyuubiNoKitsune@lemmy.blahaj.zone Joined: 2023-06-18 |
Check out his videos. If anyone knows how to properly calculate pressure for any application, it'd be Hyperspace Pirate. I agree this idea is silly and unnecessary (as he acknowledges himself), but it's done safely. He's done many projects more dangerous than this.
He also burned the fuck out of his head not long ago by doing something silly. Still love his videos tho. |
||
| 4 | |||
|
eleijeep
piefed.social
eleijeep@piefed.social Joined: 2025-09-22 |
Check out his videos. If anyone knows how to properly calculate pressure for any application, it'd be Hyperspace Pirate. I agree this idea is silly and unnecessary (as he acknowledges himself), but it's done safely. He's done many projects more dangerous than this.
I don't know why you're giving him that credit; he's almost killed himself once already. (Warning: images of serious chemical burn injury) https://youtu.be/WW6ty2aeZ-k?si=XU_rrBjn0jAgOIi9&t=473 |
||
| 2 | |||
|
janewaydidnothingwrong
lemmy.world
janewaydidnothingwrong@lemmy.world Joined: 2025-06-30 |
I don't know why you're giving him that credit; he's almost killed himself once already. (Warning: images of serious chemical burn injury) https://youtu.be/WW6ty2aeZ-k?si=XU_rrBjn0jAgOIi9&t=473
So? He is a hobbyist who documents his projects, he isnt advocating that people do all the same stuff he does. People have accidents all the time, it doesnt negate their intelligence. |
||
| 5 | |||
|
Phoenixz
lemmy.ca
phoenixz@lemmy.ca Joined: 2023-06-10 |
Should be ok as it isn't going that deep anyway. If it fails you get out and surface.
Oh I know, and I'm not worried about the guy trying this in his pool I'm worried about the idiot who thinks this too will work for a 30 meter dive, because there is always THAT guy who knows it all |
||
| 3 | |||
|
Yggstyle
lemmy.world
yggstyle@lemmy.world Joined: 2023-07-07 |
The oceangate is strong with this moron.
Considering how willingly he comments on the badness that can happen.... And the fact he actually pressure tests his builds AND does the math ... I'd say he's a far cry from a company that pressure tests their builds with passengers. Live. Breifly. I appreciate his content. Its interesting and hearkens back to old youtube content before it became a glorified ad stream. Its a dude doing a thing and taking you along for the ride. If you are entertained? Cool. If you learned something? So much the better. |
||
| 3 | |||
|
Yggstyle
lemmy.world
yggstyle@lemmy.world Joined: 2023-07-07 |
I don't know why you're giving him that credit; he's almost killed himself once already. (Warning: images of serious chemical burn injury) https://youtu.be/WW6ty2aeZ-k?si=XU_rrBjn0jAgOIi9&t=473
I'd give him credit for explaining (frequently) how dangerous what he is doing is... and frankly his willingness to quite literally showcase what the result of the badness can be. Too few channels do either. And there's some wildly dangerous shit posted daily that is over-edited and rarely even touches on the very real dangers of what they showcase. It gives the illusion of safety to people who likely don't understand the science / risks. |
||
| 2 | |||
|
Yggstyle
lemmy.world
yggstyle@lemmy.world Joined: 2023-07-07 |
Though this is awesome and cool, but I feel like we're waiting for the first "I have no clue about physics or what I'm doing" ending up dead
Considering the other content he's produced I'd say this guy at least understands pressure reasonably well. The crab reference is a nod to the scary shit pressure can do to ... Living things. (There's some really nsfl shit out there on the topic.) |
||
| 1 | |||
|
Korhaka
sopuli.xyz
Korhaka@sopuli.xyz Joined: 2025-01-14 |
Oh I know, and I'm not worried about the guy trying this in his pool I'm worried about the idiot who thinks this too will work for a 30 meter dive, because there is always THAT guy who knows it all
I can see someone strapping the helmet to their head, then get a leak while 1m deep. They notice when it fills up. Panic and try to get it off, can't. Surface, it's still full of water because the leak is at the air entry hole and they designed it to fit snugly around the neck and it won't drain without tipping upside down. Drowns while struggling to undo the straps holding it on |
||
| 2 | |||
|
Phoenixz
lemmy.ca
phoenixz@lemmy.ca Joined: 2023-06-10 |
I can see someone strapping the helmet to their head, then get a leak while 1m deep. They notice when it fills up. Panic and try to get it off, can't. Surface, it's still full of water because the leak is at the air entry hole and they designed it to fit snugly around the neck and it won't drain without tipping upside down. Drowns while struggling to undo the straps holding it on
This too Way too many ways for this to go wrong in the hands of dumb people |
||
| 1 | |||
|
Phoenixz
lemmy.ca
phoenixz@lemmy.ca Joined: 2023-06-10 |
So? He is a hobbyist who documents his projects, he isnt advocating that people do all the same stuff he does. People have accidents all the time, it doesnt negate their intelligence.
I'm not saying this guy is too dumb I'm saying half the internet is too dumb for this and people with zero knowledge and experience will try to replicate this and die |
||
| 0 | |||
|
Phoenixz
lemmy.ca
phoenixz@lemmy.ca Joined: 2023-06-10 |
Considering the other content he's produced I'd say this guy at least understands pressure reasonably well. The crab reference is a nod to the scary shit pressure can do to ... Living things. (There's some really nsfl shit out there on the topic.)
I'm sure he understands it all Will all the viewers who are going to replicate this thing understand it? |
||
| 1 | |||
|
Yggstyle
lemmy.world
yggstyle@lemmy.world Joined: 2023-07-07 |
I'm sure he understands it all Will all the viewers who are going to replicate this thing understand it?
Certainly not. The first time I read how to make thermite, smoke bombs, etc.. I definitely was too young to fully work out the ramifications of my actions. With that said: how many people ignore warnings that are clearly posted? That's a human flaw. It's not age gated. Needing to see for ourselves that the stove is hot sometimes is the only way we learn. Acknowledging this - does it mean we shouldn't provide the knowledge because somone may do something stupid? I don't believe that should be the case. In short: people are going to do dumb shit - but I don't think that means we need to over engineer the world to protect them from themselves. |
||
| 2 | |||
|
Korhaka
sopuli.xyz
Korhaka@sopuli.xyz Joined: 2025-01-14 |
I'm sure he understands it all Will all the viewers who are going to replicate this thing understand it?
This is why I keep to shallow freediving or snorkeling. There also isn't anything of value to see in the water here which helps. Sometimes the water is almost clear enough to see your feet. Did manage to swim through a school of tiny fish before. Not having to surface as often could be nice, but most ways of doing that involve quite a few risks and/or costs, so a snorkel is probably the best choice. |
||
| 1 | |||
|
Korhaka
sopuli.xyz
Korhaka@sopuli.xyz Joined: 2025-01-14 |
This too Way too many ways for this to go wrong in the hands of dumb people
Iron lung diving snorkel setup. Allows you to overcome the pressure and use a 15m long snorkel! And you accidentally set it to the wrong depth and blow up your lungs. |
||
| 1 | |||
ProdigalFrog
slrpnk.net
ProdigalFrog@slrpnk.netJoined: 2023-07-04 |
I can see someone strapping the helmet to their head, then get a leak while 1m deep. They notice when it fills up. Panic and try to get it off, can't. Surface, it's still full of water because the leak is at the air entry hole and they designed it to fit snugly around the neck and it won't drain without tipping upside down. Drowns while struggling to undo the straps holding it on
I'm assuming you didn't watch the video, but this particular helmet design has a completely open bottom. the only thing keeping the water beneath you out is the positive pressure from the air hose. Any excess air flows out the bottom. it needs weights attached to it to keep it from floating (he attached just enough weight to keep it neutrally buoyant). If it sprung a leak, you would easily be able to remove the helmet either by lifting it up off you, or tilting forward or to the side and sliding it off. it is not strapped to the person at all. |
||
| 2 | |||
ProdigalFrog
slrpnk.net
ProdigalFrog@slrpnk.netJoined: 2023-07-04 |
Iron lung diving snorkel setup. Allows you to overcome the pressure and use a 15m long snorkel! And you accidentally set it to the wrong depth and blow up your lungs.
How would it blow up your lungs? |
||
| 1 | |||
|
Korhaka
sopuli.xyz
Korhaka@sopuli.xyz Joined: 2025-01-14 |
How would it blow up your lungs?
Overpressure, 10m deep is roughly double the pressure at sea level. |
||
| 1 | |||
ProdigalFrog
slrpnk.net
ProdigalFrog@slrpnk.netJoined: 2023-07-04 |
Overpressure, 10m deep is roughly double the pressure at sea level.
I'm not super well versed with diving, but wouldn't the excess pressure and air just go out the bottom of the helmet? it's open to the water below, similar to shallow-water helmets, which are used by untrained tourists. |
||
| 1 | |||
|
Korhaka
sopuli.xyz
Korhaka@sopuli.xyz Joined: 2025-01-14 |
I'm assuming you didn't watch the video, but this particular helmet design has a completely open bottom. the only thing keeping the water beneath you out is the positive pressure from the air hose. Any excess air flows out the bottom. it needs weights attached to it to keep it from floating (he attached just enough weight to keep it neutrally buoyant). If it sprung a leak, you would easily be a...
Yes, this one does. Someone copying it may make poor choices and change it in ways that are dangerous. |
||
| 1 | |||
ProdigalFrog
slrpnk.net
ProdigalFrog@slrpnk.netJoined: 2023-07-04 |
Yes, this one does. Someone copying it may make poor choices and change it in ways that are dangerous.
Hm. Out of curiosity, do also believe that instructional videos of how to do house construction, electrical work, or brake repair on cars should not be freely available to prevent people from watching it and doing incorrectly and dangerously? |
||
| 0 | |||
|
Korhaka
sopuli.xyz
Korhaka@sopuli.xyz Joined: 2025-01-14 |
Hm. Out of curiosity, do also believe that instructional videos of how to do house construction, electrical work, or brake repair on cars should not be freely available to prevent people from watching it and doing incorrectly and dangerously?
Also believe? I don't think I ever said anything shouldn't be freely available. |
||
| 1 | |||
ProdigalFrog
slrpnk.net
ProdigalFrog@slrpnk.netJoined: 2023-07-04 |
Also believe? I don't think I ever said anything shouldn't be freely available.
Your previous comment lead me to think that you disapprove of instructional videos of things that if replicated by someone who does it incorrectly it would become dangerous or life-threatening. |
||
| 1 | |||
|
Korhaka
sopuli.xyz
Korhaka@sopuli.xyz Joined: 2025-01-14 |
Your previous comment lead me to think that you disapprove of instructional videos of things that if replicated by someone who does it incorrectly it would become dangerous or life-threatening.
More speculation on how someone could mess up trying to copy it if they don't consider safety |
||
| 1 | |||
|
Blue_Morpho
lemmy.world
Blue_Morpho@lemmy.world Joined: 2023-11-14 |
I'm not saying this guy is too dumb I'm saying half the internet is too dumb for this and people with zero knowledge and experience will try to replicate this and die
Mythbusters was awesome, did far more dangerous home made stunts and broadcast to a wider audience than this guy. |
||
| 1 | |||
|
Blue_Morpho
lemmy.world
Blue_Morpho@lemmy.world Joined: 2023-11-14 |
First thought was nope nope nope to diy diving helmet, but looks like it would be quick to remove so not too bad. Feels way overengineered if you just wanted to sit in your pool though. I know snorkels get into problems with depth as your lungs can't inhale against the pressure. But I am curious how deep that would get you. The dead air in the snorkel is another issue but you can solve that eas...
His helmet is pressurized but if it's just a snorkel then 1 meter is the limit. I tried as a kid. |
||
| 1 | |||
|
Phoenixz
lemmy.ca
phoenixz@lemmy.ca Joined: 2023-06-10 |
This is why I keep to shallow freediving or snorkeling. There also isn't anything of value to see in the water here which helps. Sometimes the water is almost clear enough to see your feet. Did manage to swim through a school of tiny fish before. Not having to surface as often could be nice, but most ways of doing that involve quite a few risks and/or costs, so a snorkel is probably the best choice.
It just isn't as cool though, which I think is a factor as well for many |
||
| 1 | |||
| Post Reply |
Back to top |